产品展示|Products

耐高温玻纤漆雾毡

UNIQUE别众耐高温玻纤漆雾毡

滤材由渐密式结构玻璃纤维制成。从进风面到出风面纤维结构密度递增，这种结构能保证灰尘粒子被阻挡在较深的层次，从而可提高尘埃容纳量。由于材质可压缩性较低，所以在进气冲击时，滤料不会产生挤压，从而不同密度的层次都能有效容纳尘埃。
滤料为绿白两色，绿色面为空气迎风面。

采用玻璃长纤维，以非织物式方式均匀迭合制成，出风面经过特殊处理，解决了普通耐高温玻纤棉的掉纤维现象。

性能稳定：可在240℃高温下长期使用而不老化，而且尺寸稳定性极佳，在250℃左右的热收缩率仅为0.1％，短时间暴露于300℃高中也不会收缩、脆化、软化或者融熔，只在500℃以上开始软化。

阻燃性能极佳（绝不燃烧），达A级阻燃国标，火烧不溶滴、不聚碳、不收缩、不变形。

抗化学性佳，耐湿性强，吸湿性低，使用寿命长

用途：广泛用于化工厂、火电厂、碳黑厂、水泥厂、石灰厂、炼焦厂、冶炼厂、沥青厂、喷漆厂以及电弧炉、油锅炉、焚化炉的高烟道和热空气过滤，既能有效除尘，又能抵抗有害烟雾的化学侵蚀。

规格：500×500×20（±3）mm

材料厚度 50 mm 100mm

标准尺寸： 2.0m×20m，1m×20m

玻纤漆雾毡技术数据EN779过滤器等级--------------G3

旧规格DIN24185----------------------------------EU3

漆雾捕尘能力(80Pa,0.7m/s时)-----------3,5-4,7kg/m2

过滤效率---------------------------------------93-97%

流入气流额定风速-------------------------0,7-1,75m/s

过滤速率-------------------------2500-6300m3/h/m2

初阻力（依风速而定）-------------------------7-40 Pa

耐温度----------------------------------------至170oC

耐湿度-----------------------------------------至100%

耐火性-------------------------------------------不可燃

颜色----------------------------------------------白-绿

High temperature resistant glass fiber filter mat

It is made of long fiberglass and non-woven with uniformity. Outlet side is specially treated in order to avoid the fiberglass shed.

Stable performance: No degradation under the high temperature of 240 degree Celsius use. Size

is stable with only 0.1 % contraction at 250 degree Celsius. No contraction, no embrittlement,

no softening, and no melting in short time at 300 degree Celsius, only softening at 500 degree

Celsius.Excellent flame retardance ( non-flame ), up to national Grade A flame retardance

standard. No drop, no polycarbon, no contraction, and no deformation with firing.

Excellent chemical resistance, high moisture-resistance, low moisture absorption,

long working life. Application: Be widely used in chemical plants, thermal power plant, carbon

plant, cement plant, lime factory, coking plant, metallurgical plant, asphalt plant, spray-paint

plant, the flue and heated air channel filter of electric arc furnace, oil boiler, incinerator etc. Not

only for dust extraction, but also for avoid chemical erosion and against poisonous gas.

Specification: 500×500×20（±3）mm

Initial pressure drop: ≤65Pa

Operating Temperature: ≤250 degree Celsius