C7008A1000/U
Flame Sensor, Straight pattern, 6 in. insertion
Overview
The small size of these devices enable their application to flame detection in installations where space is limited. The holder and flame rod assemblies facilitate flame proving on gas burners or gas-ignited oil burners which are controlled by electronic flame safeguard systems.
Features
•Use with Honeywell Flame Safeguard controls requiring rectification-type flame detection.
•Use only with gas.
•Install with or without cover.
•Comes in several different lengths and can be cut to exact desired length.
•Uses Rajah electrical connector.
Product Specifications
ApplicationGas fired pilot or gas fired system.Dimensions (in.)Holder: 7/8 in. diameter x 3 3/4 in. longDimensions (mm)Holder: 22 mm diameter x 95 mm longIncludes6" Flame rod and holderUsed WithFlame Amplifiers: R7247A, B, R7847A, B, R7257, R7289Mounting1/4 in. NPT maleApprovals, Underwriters Laboratories Inc.Listed: File No. MP268, Guide No. MCCZApprovals, Canadian Standards AssociationCertified: File No. L95329-1Electrical ConnectionsRajah electrical connectorApprovals, Swiss REAcceptableApprovals, Factory MutualApproved: Report No. 24181.03TypeFlame Rod Overview
The small size of these devices enable their application to flame detection in installations where space is limited. The holder and flame rod assemblies facilitate flame proving on gas burners or gas-ignited oil burners which are controlled by electronic flame safeguard systems.