High Pressure Valves, Fittings and Tubing
30,000, 40,000 and 60,000 psi service

High Pressure Equipment Company has developed a line of High Pressure products to assure safe and easy
plumbing for 30,000, 40,000 and 60,000 psi. These needle valves, fittings, line filters, check valves, safety heads,
rupture discs, anti-vibration gland assemblies, tubing and nipples are engineered to the highest standards of
repeatable quality. The reliable performance of these products has made HiP one of the world’s leading suppliers
of elevated pressure components.
High Pressure components use a coned-and-threaded connection which accommodates the high temperatures
and pressures common in these applications. High Pressure valves are available in various tubing sizes and with
body designs to satisfy widely varied requirements. A line of fittings is available to facilitate adapting to Taper Seal,
Medium Pressure, or other High Pressure threaded pipe systems.

30,000 psi High Pressure Valves
High Pressure (coned & threaded) type connections for 1/8",

1/4", 3/8", 9/16" and 1" O.D. tubing.

Non-rotating tip stems are standard for on-off service and
insure long life on valve seats. Regulating tip stems are available
for all valves at no additional cost, add - REG to part number.
Glands and collars for tubing are supplied with each valve
unless otherwise requested (glands and collars shown on
pages 4.6 and 4.A).
Materials include high tensile type 316 stainless steel bodies
and hardened 17-4PH stainless steel lower section stems.
Packing is Teflon (450°F) standard with optional Viton
(350°F), BUNA-N (200°F) and Grafoil (800°F) available at
no additional cost.
Air operators for remote control operation are available for
all valves. (Select required valve and add “HIPCO”. Refer to
section 7.0 for additional data).
High temperatures can be accommodated using extended
stuffing boxes (see page 6.6). These are available for all sizes
except 1
/8" tubing. To order, add suffix -HT to standard valve
catalog number.

Valve Features
● Non-rotating stem tips
● Packing below stem threads
● Type 316 ss high tensile bodies
● Positive gland lock device
● No stem adjustment needed
● Black T-handles or choice of 4 colors
● Tube sizes 1/8"through 9/16

60,000 psi High Pressure Valves

High Pressure (coned & threaded) type connections for 1/8",

1/4", 3/8", 9/16" and 1" O.D. tubing.
Non-rotating tip stems are standard for on-off service and
insure long life on valve seats. Regulating tip stems are available
for all valves at no additional cost, add - REG to part number.
Glands and collars for tubing are supplied with each valve
unless otherwise requested (glands and collars shown on
pages 4.6 and 4.A).
Materials include high tensile type 316 stainless steel bodies
and hardened 17-4PH stainless steel lower section stems.
Packing set consists of multiple Teflon packing with nylon back
up, with optional Viton (350°F), BUNA-N (200°F) and Grafoil
(800°F) available at no additional cost.
Air operators for remote control operation are available for
all valves. (Select required valve and add “HIPCO”. Refer to
section 7.0 for additional data).
High temperatures can be accommodated using extended
stuffing boxes (see page 6.6). These are available for all sizes
except 1/8" tubing.

Valve Features
● Non-rotating stem tips
● Packing below stem threads
● Type 316 ss high tensile bodies
● Positive gland lock device
● No stem adjustment needed
● Black T-handles or choice of 4 colors
● Tube sizes 1/8"through 9/16