Medium Pressure Valves, Fittings and Tubing
20,000 psi service

High Pressure Equipment Company has developed a line of Medium Pressure products to assure safe and easy
plumbing through 20,000 psi. These needle valves, fittings, line filters, check valves, safety heads, rupture discs,
anti-vibration gland assemblies, tubing and nipples are engineered to the highest standards of repeatable quality.
The reliable performance of these products has made HiP one of the world’s leading suppliers of elevated
pressure components.
Medium Pressure components use a compact coned-and-threaded connection which permits the larger bore
sizes and increased flow rates common in this pressure class. Medium Pressure valves are available in 1/4",

3/8", 9/16", 3/4", and 1" O.D. tubing sizes and five patterns to satisfy widely varied requirements. A line of fittings is available
to facilitate adapting to Taper Seal, High Pressure or other threaded pipe systems.

20,000 psi Medium Pressure Valves
Medium Pressure (coned & threaded) type connections
for 1/4", 3/8", 9/16", 3/4", and 1" O.D. tubing.

Non-rotating tip stems are standard for on-off service and
insure long life on valve seats. Regulating tip stems are available
for all valves at no additional cost, add - REG to part number.
Glands and collars for tubing are supplied with each valve
unless otherwise requested (glands and collars shown on
pages 3.4 and 3.A).
Materials include high tensile type 316 stainless steel bodies
and hardened 17-4PH stainless steel lower section stems.
Packing is Teflon (450°F) standard with optional Viton
(350°F), BUNA-N (200°F) and Grafoil (800°F) available at
no additional cost.
Air operators for remote control operation are available for all
valves. (Select required valve and add “HIPCO”. Refer to section
7.0 for additional data).
High temperatures can be accommodated by using extended
stuffing boxes (see page 6.6).